Mark Rejhon (mdrejhon@magi.com) reported (4/8/95) that
With the recent DPMI improvements that has gone into 0.60, you can now run some 32-bit video games in dosemu. If the game is compatible in an OS/2 DOS box, there are chances that it will work in dosemu. (Example 32-bit games include Descent, Dark Forces, Mortal Kombat 2, Rise of The Triad, which have all successfully been tested in recent dosemu releases).
Before you attempt to run a video game, you must have the keyboard
configured in raw keyboard mode and enabled VGA graphics modes, in the
/etc/dosemu.conf file. If you have successfully run graphics
programs in dosemu, and are prepared to take the risk of a possible
system crash (this is because you are letting dosemu run with root
access to the video card, and leaves the possibility of putting the
video card in a bad state that is difficult to recover from) then you
can go ahead and try running the video game.
Note, however, you will have to turn off the sound in the game. (Someone will have to program in sound board emulation before we can avoid this). Note that game timers can be a little bit slow, due to Linux multitasking and lack of high-frequency timer support. So the games may run from anywhere from 5 to 100 percent speed. Typically, the speed is approximately 50 percent in recent dosemu releases and is expected to improve eventually.
Who knows, it might even work. Please send Email to the EMUsuccess.txt maintainer if the game works successfully!
(4/8/95)
The problem is that the font information for the VGA text screen is not being saved. Get a copy of the svgalib package. The current source is in
sunsite.unc.edu:/pub/Linux/libs/graphics/svgalib125.tar.gzIt may also be available as a pre-compiled package in your favorite Linux distribution (e.g., Slackware, etc.). Use
savetextmode to
save the current text mode and font to a file in /tmp before
running dosemu. Then run textmode upon exiting dosemu to restore
it.
[The screen flickers violently, displays the video BIOS startup
message, and hangs.]
Andrew Tridgell (tridge@nimbus.anu.edu.au) reported (1/29/94)
that
I found with early versions it would work if I used:
ports { 0x42 }
but that sometimes my machine would crash when it was cycling the
video BIOS in dosemu. This is because you're allowing the VGA BIOS to
re-program your clock, which severely stuffs with Linux.
This prompted me to write the read-only and masking patches for dosemu, which I believe are still in the latest version. I now use:
ports { readonly 0x42 }
and it boots dosemu more slowly, but more reliably.
---------------------
Tim Shnaider (tims@kcbbs.gen.nz) also reported (1/18/94) that
One way of fixing this is to use the GETROM program to dump your video
BIOS to a file and edit the config file in the /etc/dosemu
directory There will be a few video lines. Here is my video line
video { vga console graphics chipset trident memsize 1024 vbios_file
/etc/dosemu/vbios }
where vbios is the file generated by typing
getrom > vbios
---------------------
Douglas Gleichman (p86884@tcville.edsg.hac.com) reported
(9/1/94) that (with the ATI Graphics Ultra)
For dosemu 0.52 you need to add this line to your dosemu.conf file:
ports { 0x1ce 0x1cf 0x238 0x23b 0x23c 0x23f 0x9ae8 0x9ae9 0x9aee 0x9aef }
The board self test will list a failure but graphics programs will
run fine.
Hannu Savolainen (hsavolai@cs.Helsinki.FI) reported
(3/21/94) that
The dosemu and any DOS program with it run under control of a protected mode operating system. This means that the memory is not mapped as the program expects. If it somehow manages to start DMA based recording with SB, the recorded sound doesn't find it's way to the application. It just destroys some data in the memory.
James B. MacLean (jmaclean@fox.nstn.ns.ca) reported
(6/19/94) that
Sorry to disappoint, but at this time dosemu does not support directly the necessary interception of interrupts or DMA generally required for sound card access via dosemu :-(.
It's bound to happen at some future date though :-),